Stepper motor, HT leads and rotor arm

Spent the day literally taking the Chimp apart.

• Oil and filter change
• Air filter clean
• ECU out and checked all readings as per Steve Heaths' Griffith and Chimaera Bible
• Checked plug gaps
• Looked for oil leaks
• Checked Oil pressure relief valve
• Cleaned stepper motor
  

Here's what I found:

1. HT leads needed replacing - done
   
2. Injection system over fueling
   
3. Rotor Arm knackered - done
   
4. Throttle potentiometer badly adjusted - fixed
   

Car runs much better now - no hesitation and idles perfectly.
Still over fueling - got to sort that.

Oil pressure is on the low side when really hot - suspect the sender or gauge.